SCVLD10 is an electronic metal detector designed to detect the transit or presence of a vehicle on a specific area defined by a magnetic loop laid underground. The principle is based on the variation in inductance (variation in frequency) caused by a metal object to the loop. The detector features several automatic options which aim at decreasing to the minimum the so-called “false calls”. In particular:

  • loop self-tuning at power on in order to eliminate possible environmental disturbances.
  • BOOST sensitivity to increase automatically the sensitivity of the loop detector when the detector is actuated by the transit of a vehicle over the loop. This function is used to prevent loos of detection of high bed vehicles or truck as they pass over the loop.

To facilitate cable mounting and servicing, plug-in terminals
are used. Two versions available:

  • SCVL10: 1-channel detector;
  • SCVL20: 2-channel detector.

COMMON FEATURES

  • Power supply: 12-24VAC-DC / 24VAC / 230VAC / 120-230VAC;
  • 4 frequencies;
  • 4 sensitivity levels;
  • 2 relay outputs;
  • 1 alarm output (opt.);
  • Loop self-tuning at power on;;
  • BOOST function;
  • External reset by MFi port and specific adapter cod. SCAVE10 (opt.);
  • 2 LED indicators: GREEN (ON – power on), RED (flashing – loop fault, ON – loop detecting) (only SCVLD10);
  • Easy installation on OMEGA rail connection with plug-in terminals.

SCVLD20 only

  • 10 sensitivity levels;
  • Selection of the type of action (just 1 loop / 2 independent loops / Selezione logica di funzionamento (solo spira 1 / spira 1-2 indipendenti / with or without direction signal);
  • MFi input setup by parameter as MODBus 9600bdr / output stop / outputs always OFF / loop reset;
  • Display of every loop working frequency;
  • Stability check of loop frequency to test the loop correct installation;
  • Funzione rilascio dinamico (patent pending);

APPLICATION

Barrier controls, automatic door and gate controls, parking and traffic controls, etc.

ACCESSORIES

  • PRE-ASSEMBLED MAGNETIC LOOP: Pre-formed magnetic detector loops, compatible with all types of magnetic metal detector and suitable for direct burial.
    • SCAVLW01: Pre-formed magnetic loop, shape 2x1m, with 10m connection cable.
    • SCAVLW02: Pre-formed magnetic loop, shape 3x2m, with 10m connection cable.
  • SCMT20 FastSet KEY: setup key which ensures an easy and quick device setup, by simply copying and pasting the setting configuration from one device to another, such as hold time or pulse duration, etc.
  • SCAVE10: adapter for MFI port / plug in screw terminal